|
WELCOME TO VISIT "AIFLON.SAMSUNG" WEBSITE |
Asbestos Fiber Packing |
ASSEALS Asbestos Yarn 1100-Dust Free
Asseals 1100-Dust free asbestos yarn is made of Russia¡¯s good quality asbestos fiber by special water process. It¡¯s very economical compare with traditional dusted asbestos yarn. It can be made into dust free asbestos rope, cloth, tape etc., Ideal for heat insulating and sealing materials.
Note: it can not resist oil, water and friction
... [more] |
|
Ceramic fiber packing |
Ceramic Fiber Packing
ASSEALS 2700
Braided Ceramic fiber packing
ASSEALS 2700I
Ceramic fiber packing reinforced with Nickel/SS wire
ASSEALS 2700G
Ceramic fiber packing with graphite impregnation
ASSEALS 2700IG
Graphited ceramic fiber packing reinforced with nickel wire
ASSEALS 2702
Tw... [more] |
|
Mineral Fiber Packing |
PA 2500 Arcylic Fiber Packing with PTFE
Braided from high strength arcylic synthetic fiber pre-impregnated with PTFE, and re-impregnated during square braiding. It has excellent properties of sealing, lubricating and resistance to chemicals.
2500G is acrylic fiber packing with oil and few PTFE
2500SC is Arcrylic fiber packing with silicon core
PA 2500G Arcylic Fiber Packing Tre... [more] |
|
Vegetable Fiber Packing |
ASSEALS 2400 Ramie Fiber Packing with PTFE
Highest quality ramie fiber impregnated with light-colored, special PTFE and inert lubricant during square plaiting operation. It can prevent product contaminated. Low maintenance, easy-to-control, it is not harsh on shafts and stems.
2400SC Ramie packing with silicon Rubber Core
High elastic silicon core can absorb vibration, to control le... [more] |
|
PTFE PACKING |
PTFE has characteristics of excellent anticorrosion, good self-lubrication and non-sticking. However, it is also substance with low heat conductivity, cold flow and great thermal expansion coefficient. All of ASSEALS PTFE packings are designed for every applications.
CONSTRUCTION:
2300(A/B) Pure PTFE Packing (Free oil)
Made of raw film twists of pure PTFE dispersion resins without any lubric... [more] |
|
ASSEALS 2200 Aramid Fiber Packing |
Braided from high quality aramide fibres with PTFE-Impregnation and lubricant additive. Extremely hard wearing. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but may damage the shaft if not used properly. A minimum shaft hardness of 60HRC is therefore recommended. Compared with other kinds of packing, it can resist more severe media and higher pres... [more] |
|
|
|